Important Release AXUS V2.3.6 FPGA Firmware. Requires uP V2.3.0 or above AXUS OSBP-04 Microprocessor File. Requires FPGA V2.3.0 and above. Issues Addressed: Incorrect colour phase for open captions in SD mode. Preview Decoder enhancements
The OSBP-04 card is fitted with an on-board 4-port Ethernet module. This software bundle contains the required firmware upload tool and release V1.1.0 code for the module.
This bundled package is required to load new FPGA and micro-code into the OSBP-04 openGear card. 29/4/2021 Updated Installation MSI
OSBP-04 Installation / Operational Manual For card FPGA versions 2.3.0 and above. A comprehensive manual for the AXUS OSBP-04 Platform card. The manual covers Installation and Operational modes of the card.
This manual details the procedures required to upgrade the cards FPGA and microprocessor code. Note: Extreme care must be taken when upgrading the firmware. If this is your first attempt at upgrading this card we recommend you call us first to discuss the procedure.
Sorry, you do not have permission to access this page. Please Login / register to be granted access.
Wohler / Europa Euro-Card SDI Jitter Modifications. Early versions of the HDCC cards had a minor assembly error that should be corrected in order to achieve better jitter performance. These instructions will assist you in performing the modifications.
AOSBP-04 Updating the Ethernet Module This manual is a step-by-step guide on how to update the internal Ethernet module of the card.